About Us

Advisor - Prof. Yun

Young Mook Yun

Professor, School of Architecture and Civil Enginnering College of Engineering, Kyungpook National University 80 Daehak-Ro, Buk-Gu, Daegu 702-701, South Korea (82) (53) 950-5610 (o), (82) (10) 3115-5610 (cp)
ymyun@knu.ac.kr, gregorioyun@gmail.com

Education

1983.03-1987.02,
Kyungpook National University, Daegu, South Korea, BS, Civil Engineerin
1987.03-1989.02,
Kyungpook National Universiy, Daegu, South Korea, MS, Civil Engineering
Thesis Title: Optimization of Reinforced Concrete T-shaped Curved Slab Structures
1989.08-1994.05,
Purdue University, West Lafayette, IN, USA, Ph.D, Civil Engineering
Thesis Title: Design and Analysis of 2-D Structural Concrete with Strut-Tie Model
2008.3-2009.2, 2014.3-2015.2,
Visiting Scholar, School of Civil Engineering,Purdue University, West Lafayette, IN, USA
Areas of Specialization: Strut-Tie Model Analysis and Design of Structural Concrete, Computational Mechanics, Computer Graphics

Selected journal Papers

  • Y. M. Yun and H. S. Chae (2019)
    An optimum indeterminate strut-and-tie model for reinforced concrete corbels, Advances in Structural Engineering.
  • Y. M. Yun, H. S. Chae, and J. A. Ramirez (2019)
    A Three-Dimensional Strut-and-Tie Model for a Four-Pile Reinforced Concrete Cap, Journal of Advanced Concrete Technology.
  • Y. M. Yun, B. H. Kim and J. A. Ramirez (2018)
    Verification of Three-Dimensional Grid Strut-and-Tie Model Approach in Structural Concrete, ACI Structural Journal.
  • Y. M. Yun, H. S. Chae, and J. A. Ramirez (2019)
    Three-Dimensional Grid Strut-and-Tie Model Approach in Structural Concrete Design, ACI Structural Journal.
  • Y. M. Yun and J. A. Ramirez (2016)
    Strength of Concrete Struts in Three-dimensional Strut-Tie Models, Journal of Structural Engineering, ASCE.
  • H. S. Chae and Y. M. Yun (2015)
    Strength of Concrete Struts for Strut-Tie Model Design of Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3.0, Journal of Advanced Concrete Technology, Vol. 13, No. 10, pp. 449-464.
  • H. S. Chae and Y. M. Yun (2015)
    Strut-Tie Model for Two-span Continuous RC Deep Beams, Computers and Concrete, Vol. 16, No. 3, pp. 357-380.
  • B. H. Kim and Y. M. Yun (2011)
    An Indeterminate Strut-Tie Model and Load Distribution Ratio for RC Deep Beams – (I) Model & Load Distribution Ratio, Internal Journal of Advances in Structural Engineering, Vol. 14, No. 6, pp. 1031-1041.
  • B. H. Kim and Y. M. Yun (2011)
    An Indeterminate Strut-Tie Model and Load Distribution Ratio for RC Deep Beams – (II) Validity Evaluation, Internal Journal of Advances in Structural Engineering, Vol. 14, No. 6, pp. 1043-1057.
  • B. H. Kim and Y. M. Yun (2010)
    A Second-Order Inelastic Analysis of Plane Steel Frames Using a Work-Increment-Control Solution Technique, International Journal of Advances in Structural Engineering, Vol. 13, No. 6, pp. 1033-1045.
  • Y. M. Yun and B. H. Kim (2008)
    A Two-Dimensional Grid Strut-Tie Model Approach for Structural Concrete, Journal of Structural Engineering, ASCE, Vol. 134, No. 7, pp. 1199-1214.
  • Y. M. Yun (2006)
    Strength of Two-Dimensional Nodal Zones in Strut-Tie Models, Journal of Structural Engineering, ASCE, Vol. 132, No. 11, pp. 1764-1783.
  • Y. M. Yun, M. M. Kang, and M. S. Lee (2005)
    Optimum Design of Plane Steel Frames with PR-Connections using Refined Plastic Hinge Analysis and Genetic Algorithm, Structural Engineering and Mechanics, Vol. 23, No. 4, pp. 387-407.
  • Y. M. Yun and B. H. Kim (2005)
    Optimum Design of Plane Steel Frame Structures using Second-order Inelastic Analysis and A Genetic Algorithm, Journal of Structural Engineering, ASCE, Vol. 131, No. 12, pp. 1820-1831.
  • Y. M. Yun (2005)
    Strut-Tie Model Evaluation of Behavior and Strength of Pre-tensioned Concrete Deep Beams, Computers and Concrete, Vol. 2, No. 4, pp. 261-297.
  • Y. M. Yun (2005)
    Evaluation of Ultimate Strength of Post-tensioned Anchorage Zones, Journal of Advanced Concrete Technology, Vol. 3, No. 1, pp. 149-160.
  • Y. M. Yun and W. S. Lee (2005)
    Nonlinear Strut-Tie Model Analysis of Pre-tensioned Concrete Deep Beams, Advances in Structural Engineering, Vol. 8, No. 1, pp. 85-98.
  • Y. M. Yun (2004)
    Ultimate Strength Analysis of Structural Concrete Deep Beams Using Strut-Tie Models, Asian Journal of Civil Engineering, Vol. 5, No. 1, pp. 101-120.
  • Y. M. Yun (2000)
    Nonlinear Strut-Tie Model Approach for Structural Concrete, ACI Structural Journal, Vol. 97, No. 4, pp. 581-590.
  • Y. M. Yun (2000)
    Computer Graphics for Nonlinear Strut-Tie Model Approach, Journal of Computing in Civil Engineering, ASCE, Vol. 14, No. 2, pp. 127-133.
  • Y. M. Yun (2000)
    A Refined Strut-Tie Model Approach and Its Application Tool, Proceedings of the Institute of Civil Engineers, Structures and Buildings, Vol. 140, No. 1, pp. 13-24.
  • Y. M. Yun and J. A. Ramirez (1996)
    Strength of Struts and Nodes in Strut-Tie Model, Journal of Structural Engineering, ASCE, Vol. 122, No. 1, pp. 20-29.
  • Y. M. Yun (1993)
    An Explicit Finite Element Formulation for Very Large Deformation Based on Updated Material Reference Frame, Journal of Finite Elements in Analysis and Design, Institution of Civil Engineers, Vol. 13, No. 2,pp. 209-214.

Awards

1988,
Selected As Student Studying Abroad at Government Expense, Korean Government, Korea
1992,
Melosh Award, Outstanding Paper, World Competition on Finite Element Analysis
1993,
Donnan Fellowship, College of Engineering, Purdue University, Indiana, USA
1996,
Award, Outstanding Paper, Korean Society of Civil Engineers, KSCE, Korea
2003,
Award, Outstanding Paper, Korean Society of Civil Engineers, KSCE, Korea
2006,
Award, Outstanding Paper, Korean Society of Steel Construction, KSSC, Korea
2008,
NRF Overseas Visiting Scholar, National Research Foundation, Korea
2010,
Award, Distinguished Research and Teaching, Kyungpook National University, Korea
2010,
Outstanding Academic Award, Daegu & Kyungpook Branch, Korean Society of Civil Engineers, KSCE, Korea
2011,
Award, Outstanding Teaching, Kyungpook National University, Korea
2015,
Outstanding Paper Award in Science and Technology, Korean Federation of Science and Technology Societies (KOFST), Seoul, Korea