AStrutTie – Design Strut and Tie Model Step (5) – Analysis Results and Structural Design Report

 Analysis Results and Structural Design Report

By clicking Design Review after the structural analysis of the truss model, the information on the cross-sectional forces of struts and ties, required and provided reinforcements, minimum reinforcements, and strength verifications of struts and nodal zones is displayed in Truss Design Review window, as shown below.

5j1

The strength conditions of concrete struts can be verified visually by executing Max. Strut/Tie Width and Req. Strut/Tie Width functions in View Options Window. In the figures shown below, the (grey-colored) maximum widths of tension and compression elements are shown in the left, and the maximum and (yellow-colored) required widths of the elements are shown in the right.

5j2

The structural design report can be previewed by double clicking Report article or clicking Preview while the right button of mouse is clicked. The items that must be previewed or printed can be selected, as shown below.

5j3

5j4

The structural design report is saved (or printed) as a RTF or an Excel file by double clicking Save as RTF file or Save as Excel file in Report Tab. The report is also saved by clicking Print while the right button of mouse is clicked. Note that the report can be saved as an Excel file only if the Microsoft Excel program is installed in the computer.

5j5

AStrutTie – Design Strut and Tie Model Step (1) – Modeling of Structure

AStrutTie – Design Strut and Tie Model Step (2) – Application of Load

AStrutTie – Design Strut and Tie Model Step (3) – Structural Analysis for ESO & Stress Flow

AStrutTie – Design Strut and Tie Model Step (4) – Modeling and Analysis of Truss Model

AStrutTie – Design Strut and Tie Model Step (5) – Analysis Results and Structural Design Report

Be the first to comment

Leave a Reply