- Select all members created by dragging
Design - [Create Area] click
- Click [Defind - Area Properties]
Thickness=0.800m
Compressive Strength of Concrete (fck)=24MPa,
Elastic Modulus of Conctete (Ec)=27,849MPa
- Click [Defind – General Properties]-Steel Tab
Yield Strength (fy)=300MPa,
Elastic Modulus (Es)=200,000MPa
- Function Reference
Create Outer Boundary
The outer boundary of a concrete member is generated by this function. The function is applicable only in the Beginning Mode. It is not activated when the every boundary line shaping a concrete member is not connected completely. The outer boundary is created only once. If another outer boundary is created, the previous outer boundary is deleted.
Create Area
The area of a concrete member surrounded by its outer boundary is generated by this function. This function is applicable only in the Beginning Mode.
Area Properties...
The thickness and material properties of a concrete member are assigned here.
General Properties...
The strength reduction factors of strut, tie, and node are assigned here. The sectional and material properties of reinforcing bars and concrete are also assigned.